RECYCLICLING FOR KIDS - Cardboard Houses for The Christmas Crib
A Simple Diagram
Project - Recycling Cardboard - Building a House For the Christmas Crib
Easy to Construct - - using Cardboard and Glue
One way for Children to learn more about recycling is to use Cardboard which is a common enough waste material. Instead of throwing it all away it can be re-used and recycled into interesting easy to make things.
Yes Christmas is still far away. But February is almost over and this month of cold and rain and March too are stay-at-home months and ideal for small projects like this. For me it's fun to sit at the kitchen table listening to the rain pattering on the window panes while employing my time playing with cardboard and glue to create something interesting that I would use later on in the year. In this instance I am making a cardboard house for the Christmas Crib.
Materials and Tools
I have some thin cardboard handy, a roll of adhesive tape or masking tape and white carpenter's glue, a stapler and scissors. I have some colours (see Painting below), one or two small brushes and a small tin of semi-matt varnish. These are all the tools and materials that I need. I am using some cardboard pieces that I cut from a shoe-box. Although cardboard is bio-degradeable it is a good idea to recycle some of it and create something interesting instead of throwing it all away.
Building a House from Recycled Material
The house I am making is roughly a cube of side 3 inches. I start by cutting a piece of cd (cardboard) 9 " x 3". Mark it at 3" intervals and draw vertical pencil lines. Hold a ruler on each of the 2 pencil lines and score with the point of the scissors with some pressure over them (mind your fingers here). You have guessed why we do this, to fold back along the pencil lines so that we have the three walls of the house that we need, the centre panel being the front. Draw a small door in this panel about 1.25" high x 0 .75" wide and draw a center-line. Again use the knife to score along the 2 sides of the door. Now cut through the top and the middle line of the door so that it we can leave it slightly ajar.
Let's cut a bottom. Just 3.5 " x 3". Fix the bottom with adhesive tape from the inside so that it protrudes 0.25" from each side. Apply some white glue to the underside of both doors to set it permanently ajar. There is no need to make a back wall for the house, but if you like you can cut a 3" x 3" size cd and join it in the same way by adhesive tape; but leave this step until after we have fitted the roof.
For the roof we need a piece of cd of size 4" x 3.5". Draw a pencil line in the middle and score slightly. We are fitting a slanting roof, therefore we fold along the scored pencil line to make the roof slanting to the right and to the left and slightly protruding about 0.25" on both sides and 0.5 at the front. Fix the roof as before either with adhesive tape or you can use strips of paper thinly spread with white glue.
On the front we are left with an open triangle under the ceiling which we will have to close somehow. We cut a very narrow strip of cd 3.5" x 0.25" to resembe a log. Glue and fix about 1" below the peak of the roof or about 2.5" from the floor and let it protrude 0.25" on each side. Again cut strips of cd of various lengths and of width 0.25" and fix them vertically from the roof to the log with small spaces between them. You'll have to measure these vertical logs yourself. Use white glue to fix.
We can also fit a chimney on one side of the roof. Use a little piece of well-glued rolled cd or paper for this.
Painting
For colouring the house, we can use any kind of paint - oil paint, acrylic or powdered colours. Powdered colours are mixed with water and white carpenter's glue. First make a solution by mixing a little water with a few drops of glue.
1. Yellow - First as an undercoat, we paint the whole thing yellow. Again use the saucer or small lid that we used before, put in a little yellow powder add the water-glue solution and mix. If you made the paint too watery you might need to apply a second coat when the first one is almost dry.
2. Brown-Yellow - If you have some yellow paint left, add a little brown powder and mix. If not, pour yellow powder and a tiny amount of brown and mix. Test the colour to see if it is brown enough. It just has to show over the yellow, do not make it too dark. Apply horizontal strokes with a small flat brush randomly here and there on the three walls to make it look as if the house is built of stone. Paint the logs at the front all brown.
Mix some darker brown and dab the logs here and there. Do not worry too much, we are not painting a canvas. It will look alright in the end.
3. Green - Mix green powder as before, again not too dark. Dab the stonework randomly here and there to make the stones look old and mossy. Also draw some small horizontal and vertical lines to roughly enclose some of the brown stones and make them stand out.
4. Red - Mix red powder or yellow and red if you want and paint the roof and the door to make it reddish.
NB. If you are using oil or acrylic colours follow the same process.
Varnishing
When the paint is dry some hours later, apply a thin coat of semi-matt varnish which will make the colours brighter, look wet and shiny. This is the simplest form of Christmas crib house that we could make. You can experiment with more complex forms and use your creativity to make even more arty-looking rustic dwellings to use in your Crib come Christmas.
View my Page about Making a Christmas Crib
- How to Make a Christmas Crib with papier mache\'
Easy how to make a Christmas Crib step by step methods